spec no: dsac0136 rev no: v.8 date: mar/18/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: s.h.chen package dimension s kpa - 2106 cgck green notes: 1. all dimensions are in millimeters (inches). 2.tolerance is 0 .1(0.004") unless otherwise noted. 3.specifications are subject to change without notice. features z 2.1mmx0.6mm right angle smt led, 1.0mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z package: 2000pcs / reel. z rohs compliant. description the green source color devices are made with ingaalp on gaas substrate light emitting diode. 2.1x0.6mm right angle surface led lamp
spec no: dsac0136 rev no: v.8 date: mar/18/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: s.h.chen selection guid e note: 1 . 1 /2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 kpa - 2106 cgck green (ingaaip) water clear 18 60 120 electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. symbol parameter device typ. max. test conditions units peak peak wavelength green 574 nm i f =20ma d dominant wavelength green 570 nm i f =20ma ? 1/2 spectral line half - width green 20 nm i f =20ma c capacitance green 15 pf v f =0v;f=1mhz v f forward voltage green 2.1 2.5 v i f =20ma i r reverse current green 10 ua v r = 5v parameter green units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsac0136 rev no: v.8 date: mar/18/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: s.h.chen green kpa - 2106cgck
spec no: dsac0136 rev no: v.8 date: mar/18/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: s.h.chen kpa - 2106cgck recommended soldering pattern (units : mm ) tape specifications (units : mm ) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|